Our promise to you is that we will never sell, share, or trade your information.
 
LORS is proud to announce that we are a preferred integrator for:
Kawasaki Robotics
 
 
Online Machine Inventory
Model 888 Model BW120 Model SB-300
GS-SA-1000 Model 4662 Model 4642 - 4644
Model 3321 Model 3324 Model 3327
Model 3323 Model 5148B Model 7913
 
LORS/TECNA TEST EQUIPMENT
Multi-Function Measurement Test Instruments
The TE1600 “WELD TESTER” is a portable instrument purposely designed for measuring the parameters of resistance welding. By using probes of different kind, the same instrument enables to measure both the welding current and the force at the electrodes. The power of the 32-bit microprocessor and the accuracy of the 12-bit A/D converter make the instrument a highly performing one. It is suitable for measuring on standard machines in alternate current (AC), direct current three-phase rectified and medium frequency machines (DC), and capacitor discharge machines (CDW):
  AC: Measures the true effective value (RMS), maximum value and average value; measures the peak value: positive and
negative values; measures the conduction angle in degrees; measures the welding time in cycles, in ½ cycle steps.
  DC: Measures the average value, the maximum value and the welding time in ms.
  CD: Measures the peak value and the welding time.
Pre- and post-blanking function with programmable time gap; it prevents the measurement errors when the slope function is used and it allows the checkout of the correct first insertion delay. Stores the value measured during the last 10 welds. Measures the welding force: it displays the maximum force value, the value at the beginning and at the end of the welding time. Blanking function, it prevents the measurement errors due to high impact force and it allows to estimate the latter. Wide availability measurement transducers. Automatic recognition of the connected sensor. BNC output to display the current wave-shape on oscilloscope. Supply by means of alkaline batteries 4 x 1.5 V (size AA). Also, the instrument can be equipped with a suitable probe for pressure measurement. This is useful for periodical checkout of manometer calibration.
Tecna Test Equipment
 
TEST & MEASURING INSTRUMENTS FOR
RESISTANCE WELDERS
ITEM PART NO. DESCRIPTION
1 1600 ANALYZER TE1600 complete with carrying case and certificate
1600/RS232 ANALYZER TE1600 equipped with RS232 port for printer, complete with carrying case and certificate
  1631 Rigid current transducer coil diameter 32-36 mm - with cable L=2m
  1632 Rigid current transducer coil diameter 40-45-46 mm - with cable L=2m
  1633 Rigid current transducer coil diameter 80 mm - with cable L=2m
  1635 Flexible transducer diameter 160 - with cable L=2m
2 1636 Flexible transducer diameter 270 - with cable L=2m
3 1661 Force transducer 200 daN 440 lb. - with cable L=2m
1662 Force transducer 2.000 daN 4.400 lb. - with cable L=2m
4 1663 Force transducer 10.000 daN 22.000 lb. - with cable L=2m
5 1664 Pressure transducer 10 bar -145 Psi
6 1673 Force transducer with reduced overall dimensions 200 daN
440 lb. - with cable L=2m
1675 Force transducer with reduced overall dimensions 1.200 daN
2.640 lb. - with cable L=2m
  1438 Shielded lead 50 OHM BNC-BNC L=1m - for connecting to oscilloscope
  22414 Female DB9 serial cable for PC COM port
  47331 Carrying case
 
Consult LORS for more available models
back to top
 
American Welding Society Member
The Wire Association International
MEMBER
 
Welder Safety Options
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
© 2012 LORS machinery
Website Designed by: Janeé Luts
Standard Welders | Multiple Head Welders | Hollow Metal Door Welders | Wire Mesh Welders
TECNA Welders | Robotics | Portable Spotwelding Guns | MYSPOT Welders
Controls | Accessories
RWMA member